HP J9298A - ProCurve 2520G-8-PoE Switch (Renewed)

(No reviews yet) Write a Review
SKU:
REF-HP-J9298A-PROCURVE-2520G-8-POE

$117.92
Inc. VAT
$98.27
Ex. VAT

Description

HP J9298A - ProCurve 2520G-8-PoE Switch (Renewed)

 
Physical specifications for the HP ProCurve 2520G-8-PoE Switch
Feature
Description
Dimensions(d)*(w)*(h)
15.95 x 25.4 x 4.45 cm (6.28 x 10 x 1.75 in) (1U height)
Weight (fully loaded)
1.66 kg (3.66 lb) including power adapter and power cord
Mounting
  • Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available)

  • Horizontal surface mounting

  • Wall mounting

Environmental specifications for the HP ProCurve 2520G-8-PoE Switch
Feature
Description
Operating temperature
0° to 45°C (32° to 113°F)
Operating relative humidity
15% to 95% @ 40°C (104° F), non-condensing
Non-operating/ Storage temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Non-operating/ Storage relative humidity
15% to 95% @ 65ºC (149ºF), non-condensing
Shock and vibration
EN 60068 (IEC 68)
Altitude
up to 3 km (10,000 ft)
Acoustic
Power: 0 dB, Pressure: 0 dB
Power specifications for the HP ProCurve 2520G-8-PoE Switch
Feature
Description
Voltage
100–240 Vac
Current
1.5 A
Idle power
9.3 W
Power consumption
86.2 W
PoE
67 W
Frequency
50/60 Hz
Maximum heat dissipation
93.9 kJ/hr (89 BTU/hr)
NOTE: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the total power budget available to all PoE ports. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE, 100% traffic, and all ports plugged in.
Technical specifications for the HP ProCurve 2520G-8-PoE Switch
Feature
Description
Processor
  • Freescale PowerPC 8313 @ 266 MHz

Memory
  • 32MB flash

  • 128MB DDR2 SDRAM

  • packet buffer size: 512KB dynamically allocated

Performance
100 Mb Latency:
  • < 5.3 µs (LIFO 64-byte packets)
1000 Mb Latency:
  • < 2.7 µs (LIFO 64-byte packets)

Throughput:
  • 14.8 million pps

Switching capacity:
  • 20 Gbps

MAC address table size:
  • 8000 entries

Ports
  • 8 RJ-45 auto-sensing 10/100 PoE ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3af PoE)

  • Media Type: Auto-MDIX

  • Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only

  • 2 dual-personality ports

  • Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)

  • 1 RJ-45 serial console port

Management
  • HP ProCurve Manager Plus

  • HP ProCurve Manager

  • Command-line interface

  • Web browser

  • Configuration menu

  • Out-of-band management (serial RS-232C)

  • IEEE 802.3 Ethernet MIB

  • Repeater MIB

  • Ethernet Interface MIB

View AllClose